 |
|||||||||
|
Standard Stepper Motor (0.9Kgcm torque) |
|||||||||
|
|
|||||||||
|
4-Phase Unipolar Stepper Motor with 1.8 Degree Step Angle |
|||||||||
|
The perfect addition to the StepperBee is one of our high resolution, medium torque 4 phase stepper motors. All that is required in addition to the StepperBee itself is a 12 DC supply. The connecting leads have had their ends pre-stripped and are ready to screw directly into the terminals of the StepperBee. The full specification of this motor is given below.... |
|||||||||
|
Specifications |
|||||||||
| Step Angle |
1.8 Degrees (200 steps per revolution) |
||||||||
| Step Angle Accuracy | 5% | ||||||||
| Phase Current | 0.16A | ||||||||
| Phase Resistance | 75 Ohms | ||||||||
| Holding Torque | 9Ncm (0.9Kgcm) | ||||||||
| Detent Torque | 1.5Ncm | ||||||||
| Rotor Inertia | 28 gcm2 | ||||||||
| Mass | 0.22Kg | ||||||||
| Insulation Class | B | ||||||||
| Shaft Configuration | Single | ||||||||
| Shaft Diameter | 5mm | ||||||||
| Number of Leads | 6 | ||||||||
| Dimensions (excl shaft) | 42.3 x 42.3 x 33.0 mm | ||||||||
| Shaft Length | 24mm (inc recess) | ||||||||
| Lead Identification | |||||||||
| Phase A | Brown | ||||||||
| V+ (12v) | White | ||||||||
| Phase /A | Red | ||||||||
| Phase B | Orange | ||||||||
| V+ (12v) | Black | ||||||||
| Phase /B | Yellow | ||||||||
|
|
|||||||||
|
|
|||||||||
|
|
|||||||||
|
. . |
|||||||||
|
© Copyright pc-control.co.uk 2008 |
|||||||||
