Starter Packs

  
 
 

   Our starter packs offer a convenient and very easy way to get started in pc control and automation.  They offer a complete "in a box" solution to operating three of the most popular automation devices from a PC USB port. Namely, a DC Motor, A Servo and a Stepper Motor. No soldering is required in any of these packs. All that is needed is a PC with a free USB port.
   Click on the image below for more information on each of the packs. The packs are all available to purchase from the Starter Packs Section of the Control Shop

    
   

 

  
 

Motor Pack
    Complete Starter Pack for PC Motor Control. All you need (except a small screwdriver) to control and automate a DC Motor/Gearbox (included) from your PC.

 
   

 

  
   

Servo Pack.
    If you have never used a servo before, let alone control one from a PC, then the “Servo Pack” provides an easy “plug-and-go” solution. Once you have the Servo running under PC control the knowledge and confidence you gain by actually using a Servo is invaluable in applying those techniques to a wide range of applications.

  
     

 

  
   

Stepper Pack
    If you have never used a stepper motor before, let alone control one from a PC, then the “Stepper Pack” provides an easy “connect-and-go” solution. Includes StepperBee, Stepper Motor, software and Battery Packs

 
     

 

  
     

 

  
                   
 

.      .

  
 

© Copyright pc-control.co.uk 2008